Commercial Framing | Series 407

Commercial Framing | Series 407

102mm Face Line Framing

102mm Face Line Framing
Maximum Panel Height* Various
Maximum Panel Width* Various
Maximum Glass Thickness ≤ 10.38mm
SHGC Range 0.33 - 0.73
Uw Range 4.3 - 6.1
Acoustics Testing Certified AS2047 Testing Certified

* Subject to individual site conditions and wind loads. Contact AWS Technical Support for more information, e-mail

Key Features / Performance Characteristics

  • Series 407 FaceLINE™ shopfront framing system has been designed to complement AWS Series 406 FrontGLAZE™ and 702 & 704 SlideMASTER™ sliding doors.
  • Glass close to the external face reduces the potential of dust build-up on transom ledges.
  • Interlocking split mullions to accommodate expansion and contraction.
  • The 102 x 50mm framing system has a variety of transom and mullion alternatives.
  • Will accept glass from 6 to 10.38mm thickness.
  • Full perimeter frame allows this system to be fitted into sub-head, sub-sill and sub-jambs if required.
  • Four snap-on cover options.
  • Designed for one- or two-storey shopfronts, vertical should not exceed the stock length. This is not a curtain wall system.

Resources & Downloads


    • Framing

      Frame and covers within 102mm allows for full sub-frame install.
    • Flexibility

      A varying array of alternative bases and covers available.
    • Sub-sill

      Series 407 framing is designed for sub-sill installation.
    • Drainage

      Concealed drainage designed to shed water more efficiently.

    • Expansion Mullion & Bead Options

      Interlocking mullion can be reinforced. Raised or flat cover bead.
      Expansion Mullion & Bead Options
    • Transom Bead Options

      Raised splayed or flat transom beads available.
      Transom Bead Options

    AWS systems designed to share similar aesthetic and performance qualities to Series 407.


    AWS systems which offer a similiar function to Series 407 but differ in aesthetics and performance.