• Series 756 awning windows feature a 75mm frame with a fully integrated hood hinge that protects the top of the sash from water intrusion.
• Series 756 awning windows have been successfully tested for compliance with Australian Standard AS 2047.
• Windows can be fabricated with mullions running through and assembled as modules with the use of snap together mullion.
• Water resistance rating of 600Pa makes this awning window suitable for most exposed locations in Australia.
• 75mm frames deliver a cleaner architectural look by reducing the number of sections required to make the frame.
• Frames can be made either square cut or mitre for a customised finish.
• Optional sash and mullion strengths cover a large variety of design wind load areas.
• Wrap around sashes will accept 18 to 20mm IGU's with full wrap around glazing channel.
• Beaded sash option is available. Beaded sash will accept a variety of glass thickness from 4mm single pane to 25mm IGU's.
• Fixed light glazing bead will accept a variety of glass thickness from 4mm single pane to 20mm IGU's.
• Sash retainer block stops the sash disengaging from the head.
• Awning sashes are fitted with heavy duty chain winders both single and dual winders. Custom AWS Performance Side Latches can be fitted to the awning sashes to withstand high negative wind loads that typically increase structural performance by about 100% over no side latches.