Series 704B is a bottom rolling sliding door with minimal sill recesses.
Doors have been tested for compliance with the relevant Australian Standards. Achieved a high water resistance of 450Pa with 55mm high sill. The 35mm sill is rated at 300Pa water resistance based on tests carried out on a similar door/sill configuration.
Patented moulded nylon turbulence diverters protect the meeting stile junction at sill, guiding air and turbulence away from the inside.
The extra strong multi hollow meeting stiles allow large sliding doors to be fabricated in high wind load areas.
This door has been tested to 3300mm high with 2500mm wide panels.
These panels are always fabricated with low bottom rail and rail stiffeners.
There are a large variety of door combinations (XF, FX, FXXF, XXF, FXX, FXXXXF, FX^XF, FXX^XXF and cavity sliding doors ).
We can fit Centor roller screens behind Series 704 sliding doors up to 7500mm wide.
There is an alternative sliding stacking flydoor system that can be fitted on the outside.
Doors can be fitted with surface mounted multipoint deadlock, mortice lock or multi point mortice lock.
Bottom rolling doors run on heavy duty double or quad bogey wheel carriages.
Aluminium sub-sills are standard under Series 704B doors. We have a variety of sub-sills to choose from. We also offer heavy duty sub-heads.
Sub-sills are fitted with integrated co-extruded Santoprene drainage hole cover flap to prevent blow-back.
Door panels will accept glass up to 8.50mm and 14.76mm thick single glazed or 20mm and 24mm double glazed IGU's.
Optional AWS Ventient passive ventilation system can be fitted into tubular sub-head on 102mm and 150mm