• Series 704T is a top hung sliding door with a sill that complies with AS1428.1 for wheelchair accessibility creating a continuous path of travel as required to meet the National Construction Code.
• The custom Centor E3 quad rollers are fully adjustable up and down when doors are in the frame.
• Doors have been tested for compliance with the relevant Australian Standards.  Achieved a high water resistance of 300Pa with 35mm high sill. The 55mm sill is rated at 450Pa water resistance based on tests carried out on a similar door/sill configuration.
• Patented moulded nylon turbulence diverters protect the meeting stile junction at sill, guiding air and turbulence away from the inside.
• The extra strong multi hollow meeting stiles allow large sliding doors to be fabricated in high wind load areas, refer panel strength tables earlier in this Section.
• This door has been tested to 3300mm high and tested to 2500mm wide.
• There are a large variety of door combinations (XF,  FX, FXXF,  XXF,  FXX,  FXXXXF and cavity sliding doors ).
• We can fit Centor roller screens behind Series 704 sliding doors up to 7500mm wide.
• Square clean lines with soft radius edges on internal meeting stile corners.
• Doors can be fitted with surface mounted multipoint deadlock, mortice lock or multi point mortice lock.
• Aluminium sub-sills are standard under Series 704T doors. We have a variety of sub-sills to choose from.
• Sub-sills are fitted with integrated co-extruded Santoprene drainage hole cover flap to prevent blow-back.
• Door panels will accept glass up to 8.50mm and 14.76mm thick single glazed or 20mm and 24mm double glazed IGU's.